BWNXQ - PITTHANE CATALYST COMP B, 97-819, (052186E)

  • MSDS: BWNXQ
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: PITTHANE CATALYST COMP B, 97-819, (052186E)
  • National Stock Number: 8010-00N056911
Product Identification

Product ID:PITTHANE CATALYST COMP B, 97-819, (052186E)
MSDS Date:01/19/1988
FSC:8010
NIIN:00N056911
MSDS Number: BWNXQ

Responsible Party
PPG INDUSTRIES INC
260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-963-5822

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

ISOPHORONE DIISOCYANATE BASED ADDUCT

Fraction By Weight: 60%

OSHA PEL N/K

ACGIH TLV: N/K


ISOCYANIC ACID, METHYLENE

CAS: 4098-71-9

RTECS: NQ9370000

Fraction By Weight: 5%

OSHA PEL 0.01 PPM (MFR)

ACGIH TLV: 0.005 PPM


VM & P NAPHTHA

CAS: 64742-89-8

Fraction By Weight: 15-20%

OSHA PEL N/K

ACGIH TLV: N/K


BENZENE, ETHYL-; (ETHYL BENZENE) (SARA 313)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: 5%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/125 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ACETIC ACID, 2-METHOXY-1-METHYLETHYL ESTER;

CAS: 108-65-6

RTECS: AI8295000

Fraction By Weight: 20%

OSHA PEL N/K

ACGIH TLV: N/K


ISOPHORONE DIISOCYANATE.

RTECS: 9999999ZZ


BURNING SENSATION & VISUAL DISTURB MAY

RTECS: 9999999ZZ


BURNING, REDNESS, & SWELLING ARE CNDTNS ASSOC

RTECS: 9999999ZZ


THIS PROD CONTAINS ISOCYANATES. INHAL MAY CAUSE

RTECS: 9999999ZZ


REACTIONS TO THESE MATLS ARE CHARACTERIZED BY

RTECS: 9999999ZZ


SHORTNESS OF BREATH & COUGHING. THESE SYMPS MAY

RTECS: 9999999ZZ


ROOM/PHYS IMMED; HAVE MATL SFTY DATA SHEET

RTECS: 9999999ZZ


*PERSISTENT SKIN/EYE IRRITATION OR BREATHING

RTECS: 9999999ZZ


SUBSTANCES IN PROD COMPLY W/ALL APPLIC

RTECS: 9999999ZZ


CONTAMINANTS AGAINST WHICH RESP IS EFFECTIVE &

RTECS: 9999999ZZ


LIMS, LEL STATED LIM, & TO REMOVE DECOMP PRODS DURING

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES SEV IRRIT. SKIN:CAUSES PRIMARY IRRIT. MAY BE
HARMFUL IF ABSORBED THRU SKIN. PRLNGD/RPTD CONT MAY CAUSE ALLERGIC
SKIN REACTION. INHAL:VAP & SPRAY MIS T HARMFUL. MAY CAUSE IRRIT
AND/OR ALLERGIC RESP REACTION IN LUNGS. VAP IRRITATES EYES, NOSE, &
THROAT. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:RPTD EXPOS TO HIGH VAP CONC MAY CAUSE
IRRIT OF RESP SYS & PERM BRAIN & NERV SYS DMG. INTENTIONAL MISUSE
BY DELIB CONCENTRATING & INHALING CONTENTS CAN BE HARMFUL/FATAL.
SIGNS & SYMPT OF OVERE XP:EYE WATERING, HDCHS, NAUS, DIZZ, & LOSS
COORD ARE INDICATION THAT SOLV LEV ARE TOO HIGH. REDNESS, ITCHING,
(ING 7)
Medical Cond Aggravated by Exposure:DO NOT USE IF YOU HAVE CHRONIC
(LONG-TERM) LUNG OR BREATHING PROBLEMS, OR IF YOU HAVE EVER HAD
REACTION TO ISOCYANATES.

First Aid

First Aid:INGEST:GIVE 1/2 GLASSES OF WATER, BUT DO NOT INDUCE VOMIT.
EYE:FLUSH IMMED W/PLENTY OF WATER FOR @ LEAST 15 MINS. SKIN:FLUSH
IMMED W/PLENTY OF WATER FOLLOWED BY WASHING W/SOAP & WATER.
INHAL:IF AFFECT ED BY INHAL OF VAP/SPRAY MIST, REMOVE TO FRESH AIR.
APPLY ARTF RESP & OTHER SUPPORTIVE MEASURES AS REQD. OTHER:IF ANY
OF FOLLOWING OCCUR DURING/FOLLOWING USE OF PROD, CONT POIS CTL CTR,
EMER (ING 12)

Fire Fighting

Flash Point Method:PMCC
Flash Point:79.0F,26.1C
Lower Limits:1.0%
Extinguishing Media:USE NATL FIRE PROT ASSO (NFPA) CLASS B EXTING
(CO*2, DRY CHEM, OR UNIVERSAL AQUEOUS FILM FORMING FOAM) (SUPDAT)
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP AND (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT, ELEC EQUIP, SPARKS, & OPEN FLAMES. CLSD CNTNRS MAY EXPLODE
WHEN EXPOS TO EXTREME HEAT. DO NOT APPLY ON HOT (SUPDAT)

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE, OR
OTHER ABSORB MATL & PLACE INTO CNTNRS FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTYS
IN BUILDINGS DESIGNED & PROTECTED FOR STOR OF NFPA CLASS IC FLAMM
LIQS. CNTNRS SHOULD BE GROUNDED WHEN POURING.
Other Precautions:MATL IS PART OF MULTIPLE COMPONENT COATING SYS, READ
MATL SFTY DATA SHEET(S) FOR OTHER COMPONENT/COMPONENTS BEFORE
BLENDING AS RSLTG MIX MAY HAVE HAZ OF ALL OF ITS PARTS. AVOID FREE
FALL OF LIQS IN EX CESS OF FEW INCHES. ALL CHEM (ING 14)

Exposure Controls

Respiratory Protection:WHERE OVER-SPRAY IS PRESENT USE POS PRESS
AIR-SUPPLIED RESP (NIOSH/MSHA TC-19C). WEAR RESP FOR WHOLE TIME OF
SPRAYING & UNTIL ALL VAPS & MISTS ARE GONE. READ RESP MFG'S
INSTRUCTIONS & LITERATURE CAREF ULLY TO DETERM TYPE OF AIRBORNE
(ING 15)
Ventilation:PROVIDE GEN DILUTION/LOC EXHAUST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS BELOW LOWEST SUGGESTED EXPOS (ING 16)
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APP CHEM WKR GOGG W/FFACE SHLD
Other Protective Equipment:WEAR IMPERMEABLE PROT CLTHG CONST OF
NITRILE, NEOPRENE/LATEX RUBB SUFF TO COVER ENT BODY. ANSI APP
EYEWSH FNTN .
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:DESIGNED TO EXTING NFPA CLASS IC FLAMM LIQ FIRES. FIRE
FIGHT PROC:POSS AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF
WATER IS USED, FOG NOZZ ARE PREF. EXPLO HAZ:SURF. TOXIC GASES MAY
FOR M WHEN PROD IS CONT BY FLAME/HOT SURF. HAZ DECOMP PROD:FUMES
INCLDG:CO*2, OXIDES OF NITROGEN, HYDROGEN CYANIDE, (ING 6)

Chemical Properties

Boiling Pt:B.P. Text:>527F,>275C
Vapor Pres:3.2
Vapor Density:HVR/AIR
Spec Gravity:0.10
Evaporation Rate & Reference:42 (BUOAC = 100)
Solubility in Water:40%
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:46

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG OXIDIZING
AGENTS. AVOID WATER AND ALCOHOLS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING, OR FLAME-CUTTING ON SURF COATED W/PROD
MAY PRODUCE (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, AND LOCAL ENVIRON CONTROL REGS. EMPTY CNTNRS SHOULD BE
RECYCLED OR DISPOSED OF THRU APPRVD WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.